”World’s Epicenter For Used Process Equipment”

Steam Boilers
  1. 900,000 lb/hr Babcock & Wilcox Oil Fired Boiler. (converted from coal) Boiler capacity units 1 & 2, 900,000 lbs/hr, unit 3 - 875,000 lb/hr, unit 4 - 655,700 lb/hr. Design pressure units 1,2 & 3, 1500 psig, unit 4 - 1675 psig. Design Temp. unit 1 & 2 - 900 deg F, unit 3 - 950 deg F, unit 4 - 1000 deg F. Boiler efficiency, unit 1 - 83-1%, unit 2 - 88.1%, unit 3 - 88.0% and unit 4 - 89.69%. Click here to request more information
  2. 496040 lb/hr (225 t/hr) @ 140 bar and 540 deg C, multi-fuel watertube boiler system, mfd by CMI, 753 cu m evaporative surface area, 2 x superheaters 2,932 sq m surface area, 2 x injectors (1- between the 2-superheaters and 1- after the HP superheater), 2883 sq m economiser, boiler with drum nominal capcity 4.6 cu m, max 7.47 cu m, min 2.323 cu m, 3x safety valves, manufactured by CSV Dresser, rated 125 t/hr @ 170 bar, boiler is multi-fuel by natural gas (94.69% efficiency with 2% 02 concentration in smoke), fuel oil (93.92% efficiency with 3% 02), pulverised coal (92.72% efficiency with 4% 02), 12-ignition burners operated either with propane or natural gas.
    • Coal installations
      • 2- storage silos for raw coal
      • 2-chain-type coal conveyors
      • 2-coal crushers
      • 2x6 tangential burners, direct firing
    • Fuel installations:
      • 3 x 4 burners
      • 2-HP pumps
      • 2-fuel oil pre-heaters (with steam)
    • Gas installations:
  3. 330,000 lb/hr B&W coal/gas fired boiler, 1325 psig/950F, radiant type with water cooled hopper bottom furnace. Boiler heating surface 6057 sq. ft., furnace heating surface 5417 sq ft. econimizer 4570 sq. ft., S/H 16200 sq. ft. Includes most auxiliaries. 34400 lbs coal/hr, 86.9% efficiency. Efficiency or gas fuel 82.3%. Click here to request more information
  4. 220,000 lb/hr B&W coal/gas fired boiler. Type RG-52. 1325 psig/950 F, radiant type with water cooled hopper bottom furnace. Boiler heating surface 4961 sq. ft., furnace heating surface 4185 sq. ft. economizer 5552 square foot, super heater 13420 sq. ft. Includes most auxiliaries. 23,000 lbs coal/hr, 86.9% efficiency. Efficiency in gas 83.2%. (3) units available. Click here to request more information
  5. 206080 lb/hr (92 t/hr) @ 109 bar and 405 deg C, high pressure packaged steam boiler, mfd by Foster Wheeler, type 'D' MSI-530-7NX, boiler with (3) Hamworthy type DF16 natural gas/propane fired burners, furnace pressure high side 88.4 sqm, boiler bank 492.1 sqm, primary superheater 129.1 sqm, economiser 3062 sqm, furnace volume 100.9 cum, boiler complete with all ancillaries. Click here to request more information
  6. 206080 lb/hr (92 t/hr) @ 109 bar and 405 deg C, high pressure packaged steam boiler, mfd by Foster Wheeler, type 'D' MSI-530-7NX, boiler with (3) Hamworthy type DF16 natural gas/propane fired burners, furnace pressure high side 88.4 sqm, boiler bank 492.1 sqm, primary superheater 129.1 sqm, economiser 3062 sqm, furnace volume 100.9 cum, boiler complete with all ancillaries. Click here to request more information
  7. 175,000 lbs/hr Combustion Engineering Tube Type, Balanced Housing Boiler. Steam Pressure 875 psig (63.62 kg/cm2) @ 910 deg F (487.7 deg C). Click here to request more information
  8. 165,000 pph(74.8 T/hr) Babcock & Wilcox stoker fired boiler, 700 psig (48 bar) 725 deg. F(385 deg C), designed for crushed coal/refuse. Total tube surface area 3200 sq. ft|(300 m¦). Design pressure 850 psig(58.6 bar). Includes forced draft fan, steam coil air heater, air preheater, soot blowers, overfire air fan, mechanical dust collector, electrostatic precipitator, controls, induced draft fan and feedwater pump with steam turbine driver. Five units available. Click here to request more information
  9. 140,000 lb/hr Steam Boiler. (Package) Boiler. Natural gas fired. Max 250 psi. Riley Stoker. Click here to request more information
  10. 134400 lbs/hr (60 t/h) @ 18 bar fluidised bed boiler, model Stein Fasel, 60 t/hr max of saturated steam, process variation 10-16 bar, coal fired with gas ignition, unit fully computerised from coal truck unloading to ashes truck loading, 6-adjustable zones according to the steam power required by the process (f15 t/hr - 60 t/hr), unit with coal storage, ashes silos, pneumatic coal and ashes transportation, Foxboro computor, PLC Merlin Gerin , sleeve filters, dust separator, pre and post economiser. Click here to request more information
  11. 127206 lbs/hr (57.7 t/hr) @ 72 barg & 510 deg C, coal fired steam boiler system, maufactured by Aalborg Industries, system consists of 1 x Elkstrom economiser, approx 8MW capacity, 1 x NEI coal travelling grate, internal combustion class 'L' type stroker with F.D. air through returns chains, complete with travel chute and feed distributer, 1 x set of Clyde soot blowing equipment, comprising of a full set of H.P blowers, both traversing and rotary, complete with control panel and valves, 1 x F.D, I.D and secondary air fans, manufactured by Howden Sirroco, complete with drive motors and control dampers, 1 x control system for boiler, coal and ash handling plant, manufactured by Euthotherm international, type TCS, system 6000, 1 x feed water system and tank, complete with steam de-aeration, main and standby pump systems and automatic controls, 1 x ash collection system, consisting of 3-collection rollsinto wet collector conveyor, ash removal is semi-dry, 1 x clean drains system, 1 x 415 volt M.M.C system, Asquith 18 tier 415 volt M.M.C for all boiler drives and distribution, 31 Mva fault leve complete with 21000 A bus bars and main isolator. Click here to request more information
  12. 115,000 lb/hr Volvano electric boiler, 125 psig, rated 750 KVA, 13.8 KV/600 V, 60 Hz. Feranti-Packard 28/37 MVA transformer 46/25 KV Delta, 46/13.8 KV Y, Westinghouse C/B, 1500 MVA, 46 KV, 1200 A, and switch gear cubicle, 15 KV, 2500 A. Click here to request more information
  13. 100800 lb/hr (45 t/hr) @ 76 bar and 520 deg C, radiant tube boiler, manufactured by Wehrle, serial # 6436, gas/oil fired, thermal output of heating 44.62 MW, min capacity 35840 lbs/hr (16 t/hr). Click here to request more information
  14. 100,000 pph Hitachi Zosen type HC boiler, natural circulation, self-supporting water tube, one drum, packaged steam boiler for indoor installation; fuel - No. 6 oil or natural gas, desing pressure 1067 psig, steam conditions at superheater outlet - 850 psig @ 9500 degfee F, at steam drum - oil fired 976 psig - gas fired 953 psig, feedwater temperature at drum 2200 degree F and sconomizer 284/2200 degree F, force draft design, 3885 square feet boiler surface, 3121 square feet superheater, 7804 square feet economizer, total 14810 square feet. Dust emission rate 0.1 lb PM/MMBTU by #6 fuel oil. Empty weight approx 120 tons. Click here to request more information
  15. 100,000 pph Erie City type 19M Keystone, packaged steam boiler for indoor installation; fuel - No 6 or natural gas, design pressure 800 psig, operating 720 psig at 750 degree F, steam conditions at superheater outlet - 850 psig at 9500 degree F, 100000 lbs/hr evaporation, total 8610 square feet, 1973 installed, 42 inch top drum and 24 inch bottom drum. Click here to request more information
  16. 100,000 pph B&W coal fired boiler, 250 psi, with 4 Detroit rotary grate stokers, hot air combustion fans, Terry steam turbine pumps, free standing cyclone stacks that were updated in the 1990's as were baghouses (4) and the electric static precipitators. Blowdown valves, main stop and steam, safety relief valves, pneumatic feedwater valve, steam flow chart recorders on each boiler, auger fed ash handlings system with shaker system in bottom hot air burners, coal handling bucket elevators and auger feeders, fly ash collectors with ID fans. Numerous new parts. Motor control center. Equipped with soot blowers. No controls. (3) units available. Click here to request more information
  17. 100,000 lbs/hr(45T/h) Babcock & Wilcox Steam Boiler. Rated 250 psi(17 bar) @ 600 deg F(315 deg C). Gas or oil fired. Includes - deairiator, forced air fans, 2 boilers, feed pumps, valves & controls. Click here to request more information
  18. 100,000 lb/hr @ 750 PSIG Zurn Type "O" steam boiler. Used with #6 oil with gas pilot. Built 1986. Click here to request more information
  19. 90,000 lb/hr, 1030 psi, 212 deg F Babcock & Wilcox heavy oil fired Water Tube Boiler. Integral furnace type designation 175W-R & T, S/H type FM. Steam temp, 915 deg F (superheated) 7177 sq ft heating surface. Unit has Babcock FM dual size 2B-Y jet oil atomizers. Click here to request more information
  20. 89100 pph at 62 bar/400 C, Babcock & Wilcox natural circulation bi-drum boiler, type WIC, coal (stoker) fired. Max output 45 tph at 70 bar. Fuel consumption 4.8 tons/hour (5.3 t/h at max output). New economiser in May 2000. Daimond specialty type G9B 500 t blowers, dust collector, ash conveyor and feed pumps (new in 1988). Click here to request more information
  21. 80,000 lb/hr (36T/h) steam boiler. Type Volcano A design, design pressure 500 psi (34.4 bar) temp 700 deg F(371 deg C), set-up pressure 225 psi(15.5), temp 500 deg F(260 deg C) btu/hr input 111.3, Gas flow @ full capacity 112,961 cu ft/hr(3200 m¦), built 1994, sq ft 5232(48m¦)6, furnace volume 1341 cu ft(38 m¦). 4911 sq ft(456 m¦) economizer, 375 sq ft (406 m¦)superheater. Burner MFG by Platt, Nat gas/#2 fuel oil fired. Click here to request more information
  22. 36 t/hr (79366 lb/hr) @26 bar steam flow, Sulzer electric steam generator, 25.3 MW power consumption. Click here to request more information
  23. 66,000 lbs/hr (30 t/hr) Deutsche Babcock boiler, working pressure 45 bar @ 413 deg. C, designed for multiple fuels (HFO, Light oil, Gas),water cooled, design pressure 53 bar, feed water temp 125 deg C, flue gas temp (at boiler outlet) 412-421 deg C, waste gas temp 177-200 deg C, air temp (at fan inlet) 27 deg C, furnace volume 50.9 cu meter,
    heating surface areas evaporator 882 sq ft, convection II pass 1743 sq ft, superheater 720 sq ft, Economiser 6000 sq ft, feedwater preheater 62 sq ft, surface attemperator 231 sq ft. also includes soot blowers. Two boilers available. Click here to request more information
  24. 55,000 lbs/hr Loos Steam Boiler. Rated 232 psi, 522 sq ft surface area, caloric value 18,520 kw. 2 burners MFG by Saacke style SKV 100/A1. W/ (2) air blowers. Click here to request more information
  25. 55,000 PPH (25 t/h) C Wirth & Co. boiler, 50 bar/450 deg. C, with Babcock burner system for light oil/gas fuel. Boiler is complete with auxiliaries, feed water pumps and safety system. Burner system renewed in 1989. Design drum pressure 55 bar. Water volume 13.5 cubic meters. Click here to request more information
  26. 50,000 lbs/hr @ 260 psi, Cleaver Brooks water tube boiler. Mdl D-76, SN 67017, NB #44150, Unit #WL-2821. Design pressure 260 psi. Burner supply pressure 100 psi. Combination gas and oil fired. #6 fuel oil. 428 gph; propane gas 140 scfh. Heating surface boiler 3595 sq ft; waterwall 634 sq ft. Burner mfd by Cleaver Brooks, Type WT600X-CN3, SN WL-2821. Firing rate input 72.125MM BTU/hr. 3/60/460 volt, UL label. View Photo! - Click here to request more information
  27. 47,847 lb/hr @125 psi Cleaver Brooks Water Tube Boiler. Mdl DL-60-600-CN-3. Combination gas and oil fired. Fuel input to burner - No 6 oil, 410 GPH @ 100 psi, Pilot gas 350 SCFH @ 4" H2O. Click here to request more information
  28. 44800 lb/hr (20 t/hr) @ 64 bar and 500 deg C, induced draft boiler, manufactured by VKW, serial # 26468, gas fired, thermal output of heating 18.78 MW, min capacity 22400 lbs/hr (10 t/hr). Click here to request more information
  29. 40,000 lb/stm/hr on coal Nebraska Steam Boiler. Mdl NS-E-72, "D" style, 300 psig design Max working pressure. 75,000 lb/stm/hr on gas/oil. New in 1974. Click here to request more information
  30. 12,000 kg/hr Sulzer Electric Heated Steam Boiler. Built 1974 Boiler Dia. 2,000 mm, Height 4,600 mm, Total height 6,600 mm # of electrodes per phase 2, Electrical Input 8,000 kw, Operating Voltage 13.2 kv - 60 cycles. Design pressure 12 bars. Operating pressure approx. 10 bars. Feedwater temp 105 deg C. Regulating Range, Infinitely variable 0-100%, vol. 12.7 m3. Click here to request more information
  31. 22,000 lbs/hr @ 100 deg C Steam Boiler. Type steam tube, discharge pressure 10.34 bar. Built 1987. Fuel used red wood 1000. Click here to request more information
  32. 20,000 lbs/hour Nebraska Steam boiler, National Board # 2103, Serial # D-2155, Model # NS-B47-SH, heating surface 2191 sqare foot. With oil fired Cohen burner. Click here to request more information
  33. 20,000 lb/hr @ 150 psi, fully automatic firetube boiler system, mfd by Danks, type Economic packaged boiler, model 200 Metric 7, 3-pass heat transfer design to a wet back combustion chamber, Hamworthy type AWO20 heavy oil fired burners, 8'6" inside diameter x 15'6" long over the tube plates, boiler has flue gas analyser unit and smoke detection eyes, automatic and manual blow down pot, feed pump, shell is completerly lagged and encased in coated steel sheets, mounted on steel frame. Click here to request more information
  34. 20,000 lb/hr @ 150 psi, fully automatic firetube boiler system, mfd by Danks, type Economic packaged boiler, model 200 Metric 7, 3-pass heat transfer design to a wet back combustion chamber, Hamworthy type AWO20 heavy oil fired burners, 8'6" inside diameter x 15'6" long over the tube plates, boiler has flue gas analyser unit and smoke detection eyes, automatic and manual blow down pot, feed pump, shell is completerly lagged and encased in coated steel sheets, mounted on steel frame. Click here to request more information
  35. 20,000 lb/hr @ 10.86 barg, dual fired boiler, manufactered by Babcock and Robey, oil or gas fired, design pressure 10.86 barg, 3/50/415 volt, serial #31815, Hamworthy type AWD 3 burner. Click here to request more information
  36. 18,200 lbs/hr @ 120 psi, high voltage electrode steam boiler. Mfd by Hydro Steam Ind, Model BBJ-2C, SN 61781, NB #11769, blt 1985. Rated 12.2 KV. Complete unit w/5000 KVA isolation transformer; 26,000 lb/hr deaerator; (2) 20 HP feedwater pumps; water softener. Click here to request more information
  37. 106,600 btu/hr Cleaver Brooks CB 439, 600 hp Steam Boiler. SN E 46708. 200 psi. Oil & Gas fired. Built 1969. Click here to request more information
  38. 18,000 lbs/hr Industrial Combustion steam boiler. Model # 4-5-2506-IC, Serial # 9794, with UL label, Certified by Superior, National Board # 9794, 500 hp, 300 psi, surface area 2506 sqare foot. Industrial Combustion Oil fired burner, Model # DM-210P, Serial # C5212, # 5 oil, firing rate, maximum 145 gal/hr, minimum 25 gal/hr. Click here to request more information
  39. 17920 lb/hr (8 t/hr) @ 11 bar and 183 deg C, three pass boiler, manufactured by VKW, serial # 26684, oil fired, thermal output of heating 6.25 MW, min capacity 1120 lbs/hr (0.5 t/hr). Click here to request more information
  40. 17636 lb/hr (8000 kg/hr) @ 16 bar, steam boiler serial # 45534, type Loos. Click here to request more information
  41. 8000 KG/Hr ( 17600 LBS/Hr) high steam boiler. Mfg. by Loos, built 1985, rebuilt 1997. Type UL-S8000.SR# 48332. Heating rating 5233 kW @ 10 bar. Burner mfg. by Weishaupt for natural gas firing. Click here to request more information
  42. 14,000 lb/hr @ 15 psi, water tube packaged boiler. Mfd by Intl Boiler Works, SN 14740, NB #11667. Has 1,250 sq ft heating surface rated 13,640,000 BTU/hr. W/controls. 400 HP. Oil fired w/power flame burner. Burner Mdl HPA02-D7-5H. #2 oil fired. 10 pgh. W/remote power flame starter. View Photo! - Click here to request more information
  43. 13,800 lbs/hr @ 200 psi, 400 HP, Cleaver Brooks fire tube boiler. Mdl CB600-400, SN L-66404. Combination gas and oil fired. Input 16,738,000 BTU/hr. UL label. 16'11" long x 9'8" wide x 10'8" high. Skid mtd. View Photo! - Click here to request more information
  44. \13,800 Lbs/Hr. 63 sq. ft. steam boiler. MFD by Miura, Model # LX-300, Built 1997. 300 hp, 170 psi @ 400 deg. F. Rated heating surface; natural gas fired; max input 12,400 x 1,000 BTU/Hr; min. input 4,000 x 1,000 BTU/Hr; skidded package; (ultra-low NOx boiler system). Includes P-1951-1 boiler feed water pump; B-1953-1 boiler combustion blower; Dimensions 81.125" W x 152" D x 126.375 H; power supply 230V, 460V, 575V, 3 phase, 60 hz; fuel consumption 11,770 SCFH; connection sizes main stream outlet 4", feed water inlet 1.25", gas inlet 2.5" chimmey diameter 26". Click here to request more information
  45. 13,800 Lbs/Hr. 63 sq. ft. steam boiler. MFD by Miura, Model # LX-300, built 1997. 300 hp, 170 psi @ 400 deg. F. Rated heating surface, natural gas fired; max. input 12,400 x 1,000 BTU/Hr; min. input 4,000 x 1,000 BTU/Hr; skidded package; (ultra-low NOx boiler system). Includes P-1951-1 boiler feed water pump; B-1953-1 boiler combustion blower; Dimensions 81.125" W x 152" D x 126.375 H; power supply 230V, 460V, 575V, 3 phase, 60 hz; fuel consumption 11,770 SCFH; connection sizes main stream outlet 4", feed eater inlet 1.25", gas inlet 2.5" chimmey diameter 26". Click here to request more information
  46. 13,800 Lbs/Hr. 63 sq. ft. steam boiler. MFD by Miura, Model # LX-300, built 1997. 300 hp, 170 psi @ 400 deg. F. Rated heating surface, natural gas fired; max. input 12,400 x 1,000 BTU/Hr; min. input 4,000 x 1,000 BTU/Hr; skidded package; (ultra-low NOx boiler system). Includes P-1951-1 boiler feed water pump; B-1953-1 boiler combustion blower; Dimensions 81.125" W x 152" D x 126.375 H; power supply 230V, 460V, 575V, 3 phase, 60 hz; fuel consumption 11,770 SCFH; connection sizes main stream outlet 4", feed eater inlet 1.25", gas inlet 2.5" chimmey diameter 26". Click here to request more information
  47. 60,000 lbs/hr (30 t/hr) @ 45 bar, waste heat boiler, manufactured by Standard Fasel-Lentjes B.V, model Economy H, type 30 cornertube, water tube design, gas/oil fired, design pressure 55 bar, capacity control boiler 30-110% MCR, steam temp 413 deg C, steam temp control 60-110% MCR, feed water temp 125 deg C, boiler water content 129 sq ft (total), combustion chamber volume approx 55 cu meter, furnace internal dimensions 2.5m wide x 5.3m long x 4m high, chamber heat load (at boiler) 441 kw/cu meter, chamber heat surface approx 949 sq ft, gas type natural, oil type heavy or distillate, boiler with 2-stage superheater (1=290 sq ft, 1=860 sq ft), 3-stage economiser, all stages 9436 sq ft, steam attemperator 129 sq ft, feed water 27.9 sq ft, (2) burners, manufactured by Robenhuis & Verloop, type TTL/MG-12-5, design rated 30 MW, max ambient air firing (gas) 26.5 MW, (oil) 27 MW, each burner with (2) igniters, type gas/electric, nominal duty 100-200 kw, (2) auxillary air fans, manufactured by Kiekens, type HCE-11-21-60, speed 1500-3000 rpm, static pressure 50-220 mbar, air flow 0.35-0.70 kg/sec, (1) ambient air fan, manufactured by Liekens, type 8-FSEF-800, speed 1500 rpm, static pressure 37 mbar, air flow 11 kg/sec @ 20 deg C, power 45kw, (5) soot blowers, (2) sample coolers, (4) silencers, (1) blowdown vessel, associated pipework, valves, ducting, etc. View Photo! - Click here to request more information
  48. 13227 lb/hr (6000 kg/hr) @ 16 bar, steam boiler serial # K1069, type Wulff. Click here to request more information
  49. 12,500 lbs/hr Wicks type A Water Tube Boiler. 250 lbs press. rating. Click here to request more information
  50. 12,075 lbs/hr @ 150 psi, 350 HP, Cleaver Brooks fire tube boiler. Mdl CB-600-350, NB L-68645. Oil fired, 97.6 gph oil. 15 HP blower. Click here to request more information
  51. 10,350 lbs/hr @ 15 psi, Amer Standard fire tube boiler. Mfd by Kewanee/American Standard, Type LS300G, SN 0540. 300 HP. Water pressure 30 psi. Gas fired; controls 3/60/460 volts; forced draft fan; Type KS burner, Mdl KS10.0-2415G, SN 419856, 460 volt, 17 amps. Firing range 2500 to 12600 MBH, 12554 max range, UL listed. W/control panels. All skid mtd. View Photo! - Click here to request more information
  52. 10,350 lbs @ 170 psi, Miura natural gas or propane fired water tube boiler. Type LX300SG. Heat input 11,810,000; heat output 10,050,000. 85% efficiency rating. 636 square feet heating surface. Operational water content 66 gallon. Boiler HP rating 300 BHP. 3/60/460 volt. Electric spark ignited interrupted gas pilot ignition system. 4" main steam outlet. Automatic "surface" blow down. Manual bottom blowoff. 26" chimney diameter. (2) ultraviolet flame eye sensors. Click here to request more information
  53. 10,350 lbs @ 170 psi, Miura natural gas or propane fired water tube boiler. Type LX300SG. Heat input 11,810,000; heat output 10,050,000. 85% efficiency rating. 636 square feet heating surface. Operational water content 66 gallons. Boiler HP rating 300 BHP. 3/60/460 volt. Electric spark ignited interrupted gas pilot ignition system. 4" main steam outlet. Automatic "surface" blowdown. Manual bottom blowoff. 26" chimney diameter. (2) ultraviolet flame eye sensors. Click here to request more information
  54. 10,350 lbs @ 170 psi, Miura natural gas or propane fired water tube boiler. Type LS300SG. Heat input 11,810,000; heat output 10,050,000. 85% efficiency rating. 626 square feet heating surface. Operational water content 66 gallons. Boiler HP rating 300 BHP. 3/60/460 volt. Electric spark ignited interrupted gas pilot ignition system. 4" main steam outlet. Automatic "surface" blowdown. Manual bottom blowoff. 26" chimney diameter. (2) ultraviolet flame eye sensors. Click here to request more information
  55. 10,185 lbs/hr @ 500 psi, ABCO waste heat boiler. Mdl WPB-1030-7185, SN 80121A, NB #2087. Boiler 1641 sq ft, superheater 155 sq ft. Heated side rated 10185 lbs/hr flow rate, 500 psi, inlet temp boiler 220 deg F, superheater 460 deg F, outlet temp boiler 460 deg F, superheater 650 deg F. Heating side rated 38829 lbs/hr, inlet temp boiler 1675 deg F, superheater 1800 deg F, outlet temp boiler 700 deg F, superheater 1675 deg F. Heat exchanged boiler 10,481,000 BTU/hr; superheater 1,401,000 BTU/hr. Steam drum 36" dia x 20'7" long. Unit includes American Air Filter electrostatic precipitator, rated 7150 scfm max, 16114 acfm, temp 800 deg F max, 700 deg F normal. View Photo! - Click here to request more information
  56. 10,185 lbs/hr @ 500 psi, ABCO waste heat boiler. Mdl WPB-1030-7185, SN 80120A, NB #2086. Boiler 1641 sq ft, superheater 155 sq ft. Heated side rated 10185 lbs/hr flow rate, 500 psi, inlet temp boiler 220 deg F, superheater 460 deg F, outlet temp boiler 460 deg F, superheater 650 deg F. Heating side rated 38829 lbs/hr, inlet temp boiler 1675 deg F, superheater 1800 deg F, outlet temp boiler 700 deg F, superheater 1675 deg F. Heat exchanged boiler 10,481,000 BTU/hr; superheater 1,401,000 BTU/hr. Steam drum 36" dia x 20'7" long. Unit includes American Air Filter electrostatic precipitator, rated 7150 scfm max, 16114 acfm, temp 800 deg F max, 700 deg F normal. View Photo! - Click here to request more information
  57. 55,400 btu/hr Cleaver Brooks CB 655X, 300 hp Steam Boiler. SN L 37583. 150 psi. Click here to request more information
  58. 8,000 lb/hr dual fired boiler, type 8-OTSE manufactered by Danks, oil or gas fired, Hamworthy type SD-5 burner. Click here to request more information
  59. 8,000 lb/hr dual fired boiler, type 8-OTSE manufactered by Danks, oil or gas fired, Hamworthy type SD-5 burner. Click here to request more information
  60. 7,000 Kg/hr. steam boiler. Mfg by Loos (Germany) 1979. Operating pressure 8 bar with Weishaut type UG4/210-B Brenner, natural gas fired. 1.2 - 6.3 MW. Click here to request more information
  61. 5,175 lbs/hr steam @ 150 psi, 150 HP, Cleaver Brooks fire tube boiler. Mdl CB266-150, SN L-32025. 750 sq ft heating surface (5 sq ft per boiler HP). 4 pass gas travel. Combination gas or oil fired. Burner mfd by Cleaver Brooks "LENS" w/high turndown. Multi-fuel w/proportioned air-fuel ratios, rotary damper. Pressure 150 psi. Output 5,021 BTU/hr. Fuel consumption natural gas, 45.0 gph oil. UL listed #J49383. Computerized controls by Cleaver Brooks, Mdl CB70. View Photo! - Click here to request more information
  62. 5,021 lbs/hr @ 150 psi steam and water, 150 HP, Kewanee fire tube boiler. Type #H35-150-05, SN P7047. 750 sq ft heating surface. 6' x 12' firing chamber area. Max working pressure steam 150 lb. Oil fired. Firing range oil 14-56 gpm; max firing rate 6278 MBH. Safety valve capacity 6000 lb/hr. Cust order #432245, UL listed #P338953. Burner mfd by Ray Burner Co, SN 305563, Type PAECP-144, Size 150. 3/60/208 volt. 2.10 to 6.28 million BTU. UL listed #P74362. Unit shares (3) water feed tanks/(3) pumps w/stk #100181. Tanks 300 gal CS (mtd above pumps); 70 gal and 9 gal (cut loose). Pumps (2) working @ 22 gpm, (1) switchable backup for #1 and #2 boilers. View Photo! - Click here to request more information
  63. 3,450 lbs/hr @ 150 psi, 100 HP, York Shipley fire tube boiler. Mdl SPHV-100-2-95870, SN 85-16296-H-91275, 560 Series. Heating surface 546 sq ft water side, 500 sq ft fire side. Oil fired, #2 oil. Used 29.5 gal/hr (firing rate). Burner mfd by York Shipley, "V" Mdl. Forced draft type (via blower). Blower motor 7.5 HP, 3/60/440 volt, 3450 rpm, Frame #184TC. "Fire eye" flame, monitor Type 2, Size FD-40. W/control box installed on burner/blower. Clean-out/inspection doors are hinge mtd (w/pyrex observation port on rear door). View Photo! - Click here to request more information
  64. 530 KW, 1800 lbs/hr @ 75 psi, electric packaged boiler. Mfd by Hydro Steam Ind (Alexandria,VA), Mdl PMS3052-53-4C. 3/60/480 volt main power supply. Click here to request more information
  65. 210 lbs/hr (96 kg/hr) @ 130 psi, Fulton boiler. Model# 6E, Serial# 6384, built 1991. Oil fired. Correct oil nozzle size 1.65 U.S. gallons/hr, 255,000 btu input. Electrics 3/50/415 volt, 250 watts output. View Photo! - Click here to request more information
  66. 205 lbs/hr @ 250 psi, Chromalox electric steam boiler. Mdl CHPES-72, SN N49160Q84, NB #125793. Rated for 68 KW, 6.93 brake HP, 3/60/480 volt, 82 amps, UL label. Has 1 1/4" fitting. View Photo! - Click here to request more information
  67. 687,000 BTU input @ 125 psi HW, Cleaver Brooks fire tube steam boiler. Mdl CB900112, SN L46804. Natural gas or oil fired. 32.3 gph. Click here to request more information
  68. 100 psi Electric heated steam generator. Mfd by Electric Steam Generator Corp (Michigan City,IN), Mdl 100A2/1, SN 78461, NB #54330. 220 volts. 15KW, 51000 BTU, 45 amps. Has small pump driven by 1/4 HP, 1/60/115/230 volt, 1725 rpm motor. Click here to request more information
  69. 20000 BTU, 6 KW, 100 psi, Sussman electric steam generator. Mdl MB-6, SN KF-5483P86, NB #130806. Electricals 1/60/208 volts. Mfd by Auto Steam Products Corp (Long Island,NY). Skid mtd w/Roots rotary lobe gas pump, Mdl 22XA, belt driven by 1/2 HP, DC motor, TEFC w/electric motor controller. Click here to request more information
  70. 16000 kg/hr steam generator. Mfd by Idrotermici (Italy). Operating pressure 36 bar, working temp 340 deg C. Fuel fuel oil. Click here to request more information
  71. 360 gpm, 150 psi water pressure, Parker hot water boiler. Mdl T-4600, SN 22441, NB #22441. 573 sq ft heating surface. Natural gas fired. 4,600,000 BTU/hr input; 3,680,000 BTU/hr output, 80% efficiency. Capacity 360 gpm, 20 deg F temp rise. 4" inlet, 5" outlet. Click here to request more information
  72. 54,000 watt State Ind hot water heater. SN F851-000921, Type SB6-12054SFEY. 120 gal capacity. 208 volt. Measures 30" dia x 6'6" overall length. View Photo! - Click here to request more information
  73. 150 psi, Bryan Flextube water tube boiler. Mdl CL270-S-150-FD0, Bryan #890988, SN 67881, NB #27374, blt 1990. 322 sq ft heating surface. Oil fired. Burner mfd by Gordon-Platt, Type R10.9-0-10. Firing rate max 19.3 gph, min 12.0 gph. 2.7 million BTU/hr. Input max 1350 MBH, min 2700 MBH. 3/60/460 volt motor. Control 1/60/120. Cabinet enclosed, skid mtd. W/complete controls. W/40 gpm @ 125'TDH, 316SS Peerless pump, 3 HP. View Photo! - Click here to request more information
  74. Cleaver Brooks Model CB200-500 firetube boiler. Size 500-B -HP, built 1988. 2500 square feet surface area. Input gas 20 MM BTU/hr, oil (light) 152 lbs/hr. 150 psig working pressure. Weight 50,000 lbs. Click here to request more information
  75. UNUSED Babcock Wanson model 200B boiler system. Click here to request more information
  76. 800,000 Btu/hr Wanson hot air boiler system, type Thermal fluid heater, model 200B, oil fired, 235 kw, system includes, oil tank, 3 x pumps, and chimney. Click here to request more information

Back to top

[Home] [About Us] [Equipment] [Myths & Facts] [Contact] [Links] [Request Information] [List Your Equipment] [Search] [Conversion Tables]

Last Modified: November 8, 2004

copyright © Industrial Asset Management - All Rights Reserved

Web site design by LA Consulting
BuiltWithNOF