|
- 13 UMSD continuous mixer. manufactured by Farrel, serial # 926080, capable of inserting bams up to 14" barrel, side discharge, capable of venting, rotor running speed 300 rpm, driven by 2500 hp 3/60/4160 volt, 1185 rpm via 3.931 ratio Lufkin Industries gearbox, drive has a 40 hp, 1775 rpm auxillary drive which starts the mixer at low rpm and high torque before starting main motor, mixer and gearbox each have a remote bearing lubrication skid with oil pumps, oil filters, temperature/pressure monitoring/control and oil cooling heat exchanger. Click here to request more information
- UNUSED 12 FCM Unidrive continuous mixer. For polyolefin compounds. Designed for 2280 HP, 1700 KW drive, 1000 rpm w/min 50% turndown power requirement, variable rotor speeds up to 300 rpm. Mixing and screw feeding sections chrome plated forgings, water/steam (150 psig/max) circulation thru rotary union, bedplate mounting. Includes rotors, mixing chamber, hopper, discharge orifice, bearing housing, seals, single reduction double helical 41 reduction gear, flexible couplings, lubrication system. Mixer resource requirements 1140 liter/min water (4.1 bar and 38 deg C), 90 Kg/hr (10 bar) steam, 25200 Kcal/hr hot oil. Lube system resource requirements 136 liter/min water. Click here to request more information
- UP250, CS Ko-kneader. W/jkt trough. Mfd by Baker Perkins, SN 52152. Unit is started by direct coupled 500 HP rectiflow AC motor, 3/60/440 volt, and is run by 225 HP DC motor. Output speed of drive is 80 rpm @ 500 HP, 30 rpm @ 225 HP. Trough jkt rated 200 psi max. Feed section designed for hot oil, w/(20) rings 10" dia and 10" x 10" feed opening. Mixing section has 72 teeth, 90" long. 10" dia barrel. Clam shell design w/hydraulic pistons for opening shell for cleaning. View Photo! - Click here to request more information
|
